Hydnet - the specialist in intelligent hydraulic systems
This cavity plug blocks all ports.
Corrosion resistant cavity plugs are intended for use in corrosive environments and are identified by the model code suffix /AP (see CONFIGURATION section). The bodies of these plugs are made from high strength lean duplex stainless steel. Internal parts are made from carbon steel leaded alloy, the same as standard plugs.
Note: Data may vary by configuration. See CONFIGURATION section.
| Cavity | T-17A |
| Series | 3 |
| Maximum Operating Pressure | 5000 psi |
| Maximum Operating Pressure (metric) | 350 bar |
| Port Configuration | 3 Port |
| Valve Hex Size | 1 1/4 in. |
| Valve Hex Size (metric) | 31,8 mm |
| Valve Installation Torque | 150 – 160 lbf ft |
| Valve Installation Torque (metric) | 203 – 217 Nm |
| Seal kit – Cartridge | Viton: 990017006 |
| Model Weight | 1.87 lb. |
| Model Weight (metric) | 0.85 kg. |
Control
| X | – |
Adjustment Range
| X | – |
Seal Material
| N | Buna-N |
| V | Viton |
| E | EPDM |
Material/Coating
| /AP | Stainless Steel, Passivated |
| /LH | Mild Steel, Zinc-Nickel |
