Hydnet - the specialist in intelligent hydraulic systems
Contact
Hydraulventil för luft i oljan, uppstartsventil, avluftningsventil
NQEB

Description

Air-bleed and start-up cartridges are used to purge air trapped in the system to help reduce power requirements and facilitate pump priming during the start-up of blocked center circuits.

Read more ▼
  • Air-bleed and start-up valves require a minimum of 4 gpm (15 L/min.) flow rate and 80 psi (5,5 bar) system pressure.
  • The valve will re-open when system pressure falls below 25 psi (1,7 bar)
  • After air has been purged, closing times vary from approximately 12 seconds at 4 gpm (15 L/min.) to 0.5 seconds at 50 gpm 200 L/min.).
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

Technical Data

Note: Data may vary by configuration. See CONFIGURATION section.

Cavity T-3A
Series 2
Capacity 4 – 50 gpm
Capacity (metric) 15 – 200 L/min.
Maximum Operating Pressure 5000 psi
Maximum Operating Pressure (metric) 350 bar
Valve Hex Size 1 1/8 in.
Valve Hex Size (metric) 28,6 mm
Valve Installation Torque 45 – 50 lbf ft
Valve Installation Torque (metric) 61 – 68 Nm
Model Weight .40 lb
Model Weight (metric) 0,20 kg
Seal kit – Cartridge Viton: 990203006

Configuration Options

Control

X Not Adjustable

Adjustment Range

A

Seal Material

N Buna-N
V Viton
E EPDM

Material/Coating

/AP Stainless Steel, Passivated
/LH Mild Steel, Zinc-Nickel
Cavity: T-3A
Nominal Capacity: 4-50 gpm (15-200 lpm)
Downloads
PDFSTP
Possible variants

NQEBXAE, NQEB-XAE, NQEBXAN, NQEB-XAN, NQEBXAN/AP, NQEB-XAN/AP, NQEBXAN/LH, NQEB-XAN/LH, NQEBXAV, NQEB-XAV, NQEBXAV/AP, NQEB-XAV/AP, NQEBXAV/LH, NQEB-XAV/LH