Hydnet - the specialist in intelligent hydraulic systems
The accumulator sense, pump unload pilot valve is used to sense pressure in an accumulator at port 1 of the valve and when the pressure at port 1 reaches the valve setting, port 2 connects to port 3 to vent a relief valve and unload the pump. This valve has a 15% ratio between unload setting and reset; when pressure at port 1 falls below 85% of the valve setting, port 2 is blocked from port 3 and the pump will come back online to recharge the accumulator.
This valve requires a separate check valve between port 1 and the pump. Another version of the accumulator sense, pump unload valve, QCDA, includes a free-flow check valve for pump flows under 12 gpm (50 L/min).
Note: Data may vary by configuration. See CONFIGURATION section.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 46 in³/min. |
| Capacity (metric) | 0,75 L/min. |
| Maximum Operating Pressure | 5000 psi |
| Maximum Operating Pressure (metric) | 350 bar |
| Pilot Flow Capacity | 46 in³/min. |
| Pilot Flow Capacity (metric) | 0,75 L/min. |
| Adjustment – No. of CW Turns from Min. to Max. setting | 5 |
| Valve Hex Size | 7/8 in. |
| Valve Hex Size (metric) | 22,2 mm |
| Valve Installation Torque | 30 – 35 lbf ft |
| Valve Installation Torque (metric) | 41 – 47 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in. |
| Adjustment Screw Internal Hex Size (metric) | 4 mm |
| Locknut Hex Size | 9/16 in. |
| Locknut Hex Size (metric) | 15 mm |
| Locknut Torque | 80 – 90 lbf in. |
| Locknut Torque (metric) | 9 – 10 Nm |
| Model Weight | .35 lb |
| Model Weight (metric) | 0,15 kg |
| Seal kit – Cartridge | Viton: 990011006 |
Control
| C | Tamper Resistant – Factory Set |
| L | Standard Screw Adjustment |
| K | Handknob |
Adjustment Range
| A | 1000 – 3000 psi (70 – 210 bar), 1000 psi (70 bar) Standard Setting |
| B | 500 – 1500 psi (35 – 105 bar), 500 psi (35 bar) Standard Setting |
| C | 2000 – 5000 psi (140 – 350 bar), 2000 psi (140 bar) Standard Setting |
| D | 250 – 800 psi (18 – 55 bar), 250 psi (18 bar) Standard Setting |
Seal Material
| N | Buna-N |
| V | Viton |
| E | EPDM |
Material/Coating
| /LH | Mild Steel, Zinc-Nickel |
