Hydnet - the specialist in intelligent hydraulic systems
Priority flow control valve from Sun Hydraulics
This valve is a pilot-operated, normally open, electro-proportional throttle with reverse free-flow check. Energizing the coil generates a closing force on the pilot stage which pushes the main stage poppet against the seat, proportionally blocking flow from port 2 to 1. The check will allow flow from 1 to 2 in either the open or closed condition.
Note: Data may vary by configuration. See CONFIGURATION section.
| Cavity | T-162A |
| Series | 0 |
| Capacity | 5 gpm |
| Capacity (metric) | 20 L/min. |
| Maximum Operating Pressure | 5000 psi |
| Maximum Operating Pressure (metric) | 350 bar |
| Hysteresis (with dither) | 15% |
| Linearity (with dither) | 3% |
| Repeatability (with dither) | 3% |
| Recommended dither frequency | 140 Hz |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 0.004 in³/min.@5000 psi |
| Maximum Valve Leakage at 110 SUS (24 cSt) (metric) | 0,07 cc/min.@350 bar |
| Check Cracking Pressure | 100 psi |
| Check Cracking Pressure (metric) | 7 bar |
| Viscosity Range | 35 – 2000 SUS |
| Viscosity Range (metric) | 2,8 – 380 cSt |
| Deadband, nominal (as a percentage of input) | 48% |
| Response Time – Typical | 50 ms |
| Switching Frequency | 15,000 max. cycles/hr |
| Valve Hex Size | 3/4 in. |
| Valve Hex Size (metric) | 19,1 mm |
| Valve Installation Torque | 20 – 25 lbf ft |
| Valve Installation Torque (metric) | 27 – 33 Nm |
| Model Weight | .35 lb |
| Model Weight (metric) | 0,15 kg |
| Seal kit – Cartridge | Viton: 990162006 |
Control
| X | No Manual Override |
Flow Rate
| D | Nominal 5 gpm @ 200 psi (14 bar) differential (20 L/min.) |
Seal Material
| N | Buna-N |
| V | Viton |
Control
| X01 | {with XMD-01 driver} |
| X02 | {with XMD-02 driver} |
Coil
| 212 | DIN 43650-Form A, 12 VDC |
| 212D | DIN 43650-Form A, 12 VDC, with transient voltage suppression (TVS) diodes |
| 212X01 | DIN 43650-Form A, 12 VDC, with XMD-01 driver |
| 212X02 | DIN 43650-Form A, 12 VDC, with XMD-02 driver |
| 214 | DIN 43650-Form A, 14 VDC |
| 214D | DIN 43650-Form A, 14 VDC, with transient voltage suppression (TVS) diodes |
| 214X01 | DIN 43650-Form A, 14 VDC, with XMD-01 driver |
| 214X02 | DIN 43650-Form A, 14 VDC, with XMD-02 driver |
| 224 | DIN 43650-Form A, 24 VDC |
| 224D | DIN 43650-Form A, 24 VDC, with transient voltage suppression (TVS) diodes |
| 224X01 | DIN 43650-Form A, 24 VDC, with XMD-01 driver |
| 224X02 | DIN 43650-Form A, 24 VDC, with XMD-02 driver |
| 228 | DIN 43650-Form A, 28 VDC |
| 228D | DIN 43650-Form A, 28 VDC, with transient voltage suppression (TVS) diodes |
| 228X01 | DIN 43650-Form A, 28 VDC, with XMD-01 driver |
| 228X02 | DIN 43650-Form A, 28 VDC, with XMD-02 driver |
| 612 | AMP Junior Timer, 12 VDC |
| 612D | AMP Junior Timer, 12 VDC, with transient voltage suppression (TVS) diodes |
| 614 | AMP Junior Timer, 14 VDC |
| 614D | AMP Junior Timer, 14 VDC, with transient voltage suppression (TVS) diodes |
| 624 | AMP Junior Timer, 24 VDC |
| 624D | AMP Junior Timer, 24 VDC, with transient voltage suppression (TVS) diodes |
| 628 | AMP Junior Timer, 28 VDC |
| 628D | AMP Junior Timer, 28 VDC, with transient voltage suppression (TVS) diodes |
| 712 | Twin Lead, 12 VDC |
| 712D | Twin Lead, 12 VDC, with transient voltage suppression (TVS) diodes |
| 714 | Twin Lead, 14 VDC |
| 714D | Twin Lead, 14 VDC, with transient voltage suppression (TVS) diodes |
| 724 | Twin Lead, 24 VDC |
| 724D | Twin Lead, 24 VDC, with transient voltage suppression (TVS) diodes |
| 728 | Twin Lead, 28 VDC |
| 728D | Twin Lead, 28 VDC, with transient voltage suppression (TVS) diodes |
| 812 | Metri-Pack, 12 VDC |
| 812D | Metri-Pack, 12 VDC, with transient voltage suppression (TVS) diodes |
| 814 | Metri-Pack, 14 VDC |
| 814D | Metri-Pack, 14 VDC, with transient voltage suppression (TVS) diodes |
| 824 | Metri-Pack, 24 VDC |
| 824D | Metri-Pack, 24 VDC, with transient voltage suppression (TVS) diodes |
| 828 | Metri-Pack, 28 VDC |
| 828D | Metri-Pack, 28 VDC, with transient voltage suppression (TVS) diodes |
| 912 | Deutsch DT04-2P, 12 VDC |
| 912D | Deutsch DT04-2P, 12 VDC, with transient voltage suppression (TVS) diodes |
| 912X01 | Deutsch DT04-2P, 12 VDC, with XMD-01 driver |
| 912X02 | Deutsch DT04-2P, 12 VDC, with XMD-02 driver |
| 914 | Deutsch DT04-2P, 14 VDC |
| 914D | Deutsch DT04-2P, 14 VDC, with transient voltage suppression (TVS) diodes |
| 914X01 | Deutsch DT04-2P, 14 VDC, with XMD-01 driver |
| 914X02 | Deutsch DT04-2P, 14 VDC, with XMD-02 driver |
| 924 | Deutsch DT04-2P, 24 VDC |
| 924D | Deutsch DT04-2P, 24 VDC, with transient voltage suppression (TVS) diodes |
| 924X01 | Deutsch DT04-2P, 24 VDC, with XMD-01 driver |
| 924X02 | Deutsch DT04-2P, 24 VDC, with XMD-02 driver |
| 928 | Deutsch DT04-2P, 28 VDC |
| 928D | Deutsch DT04-2P, 28 VDC, with transient voltage suppression (TVS) diodes |
| 928X01 | Deutsch DT04-2P, 28 VDC, with XMD-01 driver |
| 928X02 | Deutsch DT04-2P, 28 VDC, with XMD-02 driver |
| JM24BD | Explosion Proof, Metric (M20 X 1.5), 24 VDC, 180 Degree, CSA and ATEX Certification |
| JM24CD | Explosion Proof, Metric (M20 X 1.5), 24 VDC, 90 Degree, CSA and ATEX Certification |
| JN24BD | Explosion Proof, 1/2 inch NPT mechanical conduit, 24 VDC, 180 Degree, CSA and ATEX Certification |
| JN24CD | Explosion Proof, 1/2 inch NPT mechanical conduit, 24 VDC, 90 Degree, CSA and ATEX Certification |
