Hydnet - the specialist in intelligent hydraulic systems
Priority flow control valve from Sun Hydraulics
This valve is a normally closed, electro-proportional, blocking poppet throttle that is spring-biased closed. Energizing the coil generates an opening force on the poppet proportional to the command current, and this force is countered by the spring and flow forces. This force balance creates a metering orifice whose effective size is proportional to the current. The valve exhibits a large degree of self-compensation in the 2-to-1 direction and will provide proportional flow control in the 1-to-2 direction with the addition of an external compensator. Full reverse flow (1-to-2) with 100% command in the 1-to-2 direction is possible without a compensator under all conditions.
Note: Data may vary by configuration. See CONFIGURATION section.
| Cavity | T-162A |
| Series | 0 |
| Capacity | 2.6 gpm |
| Capacity (metric) | 9,8 L/min. |
| Maximum Operating Pressure | 5000 psi |
| Maximum Operating Pressure (metric) | 350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 0.004 in³/min.@5000 psi |
| Maximum Valve Leakage at 110 SUS (24 cSt) (metric) | 0,07 cc/min.@350 bar |
| Viscosity Range | 35 – 2000 SUS |
| Viscosity Range (metric) | 2,8 – 380 cSt |
| Response Time – Typical | 50 ms |
| Switching Frequency | 15,000 max. cycles/hr |
| Valve Hex Size | 3/4 in. |
| Valve Hex Size (metric) | 19,1 mm |
| Valve Installation Torque | 20 – 25 lbf ft |
| Valve Installation Torque (metric) | 27 – 33 Nm |
| Model Weight | .30 lb |
| Model Weight (metric) | 0,15 kg |
| U.S. Patent # | 10,302,201 |
| Seal kit – Cartridge | Viton: 990162006 |
| Hysteresis (with dither) | 14% |
| Linearity (with dither) | 5% |
| Repeatability (with dither) | 7% |
| Recommended dither frequency | 100 Hz |
| Deadband, nominal (as a percentage of input) | 50% |
Control
| M | Manual Override |
| X | No Manual Override |
Flow Rate
| C | Nominal 2.6 gpm @ 200 psi (14 bar) differential (9.8 L/min) (9,8 L/min.) |
Seal Material
| N | Buna-N |
| V | Viton |
| E | EPDM |
Control
| X01 | {with XMD-01 driver} |
| X02 | {with XMD-02 driver} |
Coil
| 212 | DIN 43650-Form A, 12 VDC |
| 212D | DIN 43650-Form A, 12 VDC, with transient voltage suppression (TVS) diodes |
| 212X01 | DIN 43650-Form A, 12 VDC, with XMD-01 driver |
| 212X02 | DIN 43650-Form A, 12 VDC, with XMD-02 driver |
| 214 | DIN 43650-Form A, 14 VDC |
| 214D | DIN 43650-Form A, 14 VDC, with transient voltage suppression (TVS) diodes |
| 214X01 | DIN 43650-Form A, 14 VDC, with XMD-01 driver |
| 214X02 | DIN 43650-Form A, 14 VDC, with XMD-02 driver |
| 224 | DIN 43650-Form A, 24 VDC |
| 224D | DIN 43650-Form A, 24 VDC, with transient voltage suppression (TVS) diodes |
| 224X01 | DIN 43650-Form A, 24 VDC, with XMD-01 driver |
| 224X02 | DIN 43650-Form A, 24 VDC, with XMD-02 driver |
| 228 | DIN 43650-Form A, 28 VDC |
| 228D | DIN 43650-Form A, 28 VDC, with transient voltage suppression (TVS) diodes |
| 228X01 | DIN 43650-Form A, 28 VDC, with XMD-01 driver |
| 228X02 | DIN 43650-Form A, 28 VDC, with XMD-02 driver |
| 612 | AMP Junior Timer, 12 VDC |
| 612D | AMP Junior Timer, 12 VDC, with transient voltage suppression (TVS) diodes |
| 614 | AMP Junior Timer, 14 VDC |
| 614D | AMP Junior Timer, 14 VDC, with transient voltage suppression (TVS) diodes |
| 624 | AMP Junior Timer, 24 VDC |
| 624D | AMP Junior Timer, 24 VDC, with transient voltage suppression (TVS) diodes |
| 628 | AMP Junior Timer, 28 VDC |
| 628D | AMP Junior Timer, 28 VDC, with transient voltage suppression (TVS) diodes |
| 712 | Twin Lead, 12 VDC |
| 712D | Twin Lead, 12 VDC, with transient voltage suppression (TVS) diodes |
| 714 | Twin Lead, 14 VDC |
| 714D | Twin Lead, 14 VDC, with transient voltage suppression (TVS) diodes |
| 724 | Twin Lead, 24 VDC |
| 724D | Twin Lead, 24 VDC, with transient voltage suppression (TVS) diodes |
| 728 | Twin Lead, 28 VDC |
| 728D | Twin Lead, 28 VDC, with transient voltage suppression (TVS) diodes |
| 812 | Metri-Pack, 12 VDC |
| 812D | Metri-Pack, 12 VDC, with transient voltage suppression (TVS) diodes |
| 814 | Metri-Pack, 14 VDC |
| 814D | Metri-Pack, 14 VDC, with transient voltage suppression (TVS) diodes |
| 824 | Metri-Pack, 24 VDC |
| 824D | Metri-Pack, 24 VDC, with transient voltage suppression (TVS) diodes |
| 828 | Metri-Pack, 28 VDC |
| 828D | Metri-Pack, 28 VDC, with transient voltage suppression (TVS) diodes |
| 912 | Deutsch DT04-2P, 12 VDC |
| 912D | Deutsch DT04-2P, 12 VDC, with transient voltage suppression (TVS) diodes |
| 912X01 | Deutsch DT04-2P, 12 VDC, with XMD-01 driver |
| 912X02 | Deutsch DT04-2P, 12 VDC, with XMD-02 driver |
| 914 | Deutsch DT04-2P, 14 VDC |
| 914D | Deutsch DT04-2P, 14 VDC, with transient voltage suppression (TVS) diodes |
| 914X01 | Deutsch DT04-2P, 14 VDC, with XMD-01 driver |
| 914X02 | Deutsch DT04-2P, 14 VDC, with XMD-02 driver |
| 924 | Deutsch DT04-2P, 24 VDC |
| 924D | Deutsch DT04-2P, 24 VDC, with transient voltage suppression (TVS) diodes |
| 924X01 | Deutsch DT04-2P, 24 VDC, with XMD-01 driver |
| 924X02 | Deutsch DT04-2P, 24 VDC, with XMD-02 driver |
| 928 | Deutsch DT04-2P, 28 VDC |
| 928D | Deutsch DT04-2P, 28 VDC, with transient voltage suppression (TVS) diodes |
| 928X01 | Deutsch DT04-2P, 28 VDC, with XMD-01 driver |
| 928X02 | Deutsch DT04-2P, 28 VDC, with XMD-02 driver |
| JM24BD | Explosion Proof, Metric (M20 X 1.5), 24 VDC, 180 Degree, CSA and ATEX Certification |
| JM24CD | Explosion Proof, Metric (M20 X 1.5), 24 VDC, 90 Degree, CSA and ATEX Certification |
| JN24BD | Explosion Proof, 1/2 inch NPT mechanical conduit, 24 VDC, 180 Degree, CSA and ATEX Certification |
| JN24CD | Explosion Proof, 1/2 inch NPT mechanical conduit, 24 VDC, 90 Degree, CSA and ATEX Certification |
