Hydnet - the specialist in intelligent hydraulic systems
Relief valve from Sun Hydraulics
This direct-acting, pilot relief cartridge incorporates back-to-back check valves. This allows it to remotely control 2 other pilot-operated valves or act as a thermal relief for both ends of an actuator. Because capacity is limited to pilot flow, this valve should be used with other valves with comparable pilot flows.
Note: Data may vary by configuration. See CONFIGURATION section.
| Cavity | T-11A |
| Series | 1 |
| Capacity | .25 gpm |
| Capacity (metric) | 1 L/min. |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 5 drops/min. |
| Maximum Valve Leakage at 110 SUS (24 cSt) (metric) | 0,3 cc/min. |
| Response Time – Typical | 2 ms |
| Adjustment – No. of CW Turns from Min. to Max. setting | 5 |
| Valve Hex Size | 7/8 in. |
| Valve Hex Size (metric) | 22,2 mm |
| Valve Installation Torque | 30 – 35 lbf ft |
| Valve Installation Torque (metric) | 41 – 47 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in. |
| Adjustment Screw Internal Hex Size (metric) | 4 mm |
| Locknut Hex Size | 9/16 in. |
| Locknut Hex Size (metric) | 15 mm |
| Locknut Torque | 80 – 90 lbf in. |
| Locknut Torque (metric) | 9 – 10 Nm |
| Seal kit – Cartridge | Viton: 990011006 |
| Model Weight | 0.35 lb. |
| Model Weight (metric) | 0.16 kg. |
Control
| C | Tamper Resistant – Factory Set |
| K | Handknob |
| L | Standard Screw Adjustment |
| O | Handknob with Panel Mount |
Adjustment Range
| A | 25 – 3000 psi (1,7 – 210 bar), 1000 psi (70 bar) Standard Setting |
| B | 25 – 1500 psi (1,7 – 105 bar), 1000 psi (70 bar) Standard Setting |
| C | 25 – 6000 psi (1,7 – 420 bar), 1000 psi (70 bar) Standard Setting |
| D | 25 – 800 psi (1,7 – 55 bar), 400 psi (28 bar) Standard Setting |
| E | 25 – 400 psi (1,7 – 28 bar), 200 psi (14 bar) Standard Setting |
| W | 25 – 4500 psi (1,7 – 315 bar), 1000 psi (70 bar) Standard Setting |
Seal Material
| N | Buna-N |
| V | Viton |
Material/Coating
| /AP | Stainless Steel, Passivated |
| /LH | Mild Steel, Zinc-Nickel |
