Hydnet - the specialist in intelligent hydraulic systems
Göteborg: +46 31 499 490
|
Stockholm: +46 8 59 470 470
|
E-mail: [email protected]
0
Quotation Request
Contact
PBJC

Pressure reducing valve from Sun Hydraulics

Description

Air-controlled, pilot-operated pressure reducing cartridges use compressed air over a diaphragm instead of an adjustable spring as the setting to reduce a high primary pressure at the inlet (port 2) to a constant reduced pressure at port 1. The air signal is supplied through a port in the hex-end of the cartridge and the hydraulic setting is directly proportional to the air setting at a ratio of 20:1 (hydraulic:air).

Read more ▼
  • All three-port pressure reducing and reducing/relieving cartridges are physically interchangeable (i.e. same flow path, same cavity for a given frame size). When considering mounting configurations, it is sometimes recommended that a full capacity return line (port 3) be used with reducing/relieving cartridges.
  • Full reverse flow from reduced pressure (port 1) to inlet (port 2) may cause the main spool to close. If reverse free flow is required in the circuit, consider adding a separate check valve to the circuit.
  • The pressure at port 3 determines the minimum valve setting and should not exceed 1000 psi (70 bar).
  • The full adjustment range is 50 to 1500 psi (3,5 to 105 bar).
  • Maximum air pressure should not exceed 150 psi (10,5 bar) due to the strength of the diaphragm.
  • Maximum pressure differential, inlet to outlet, should not exceed 3000 psi (210 bar).
  • Pilot operated reducing, reducing/relieving valves by nature are not fast acting valves. For superior dynamic response, consider direct acting valves.
  • The air control feature allows explosion proof remote control.
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

Technical Data

Note: Data may vary by configuration. See CONFIGURATION section.

Cavity T-19A
Series 4
Capacity 80 gpm
Capacity (metric) 320 L/min.
Maximum Operating Pressure 2000 psi
Maximum Operating Pressure (metric) 140 bar
Pilot Ratio 20:1
Control Pilot Flow 15 – 20 in³/min.
Control Pilot Flow (metric) 0,25 – 0,33 L/min.
Maximum Air Pressure 150 psi
Maximum Air Pressure (metric) 10,5 bar
Valve Hex Size 1 5/8 in.
Valve Hex Size (metric) 41,3 mm
Valve Installation Torque 350 – 375 lbf ft
Valve Installation Torque (metric) 474 – 508 Nm
Locknut Hex Size 9/16 in.
Locknut Hex Size (metric) 15 mm
Locknut Torque 80 – 90 lbf in.
Locknut Torque (metric) 9 – 10 Nm
Model Weight 2.85 lb.
Model Weight (metric) 1.29 kg.
Seal kit – Cartridge Viton: 990019006

Configuration Options

Control

B External 4-SAE Port

Operating Range

B 50 – 1500 psi (3,5 – 105 bar)

Seal Material

N Buna-N
V Viton
Cavity: T-19A
Nominal Capacity: 320 lpm (80 gpm)
Downloads
PDFSTP
Possible variants

PBJCBBN, PBJC-BBN, PBJCBBV, PBJC-BBV

Hydnet
EA Rosengrens gata 29
421 32 Västra Frölunda

+46 31 - 499 490
[email protected]

Products

Pages

Links

Partners