Hydnet - the specialist in intelligent hydraulic systems
Göteborg: +46 31 499 490
|
Stockholm: +46 8 59 470 470
|
E-mail: [email protected]
0
Quotation Request
Contact
CNGC

Priority flow control valve from Sun Hydraulics

Description

This valve is a fixed-orifice, non-pressure-compensated flow control with a reverse flow check. The flow setting is specified by the user and is set at the factory.

Read more ▼
  • Customer must specify the orifice diameter.
  • These are essentially check valves with bypass orifices. The flow path matches Sun’s flow controls and can be used in any flow control manifolds. Valves with the opposite direction of flow can be found under check valves with bypass orifices.
  • Because these valves are non-compensating devices, the fixed orifice size will regulate flow through the valve in proportion to the square root of the pressure differential across ports 1 and 2.
  • All 2-port flow control cartridges are physically and functionally interchangeable (i.e. same flow path, same cavity for a given frame size). However, cartridge extension dimensions from the mounting surface may vary.
  • The customer specified orifice diameter is stamped on one of the cartridge’s hex faces.
  • Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP for external stainless steel components, or /LH for external zinc-nickel plated components. See the CONFIGURATION section for all options. For further details, please see the Materials of Construction page located under TECH RESOURCES.
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

Technical Data

Note: Data may vary by configuration. See CONFIGURATION section.

Cavity T-16A
Series 3
Capacity 60 gpm
Capacity (metric) 240 L/min.
Maximum Operating Pressure 5000 psi
Maximum Operating Pressure (metric) 350 bar
Orifice Range .016 – .218 in.
Orifice Range (metric) 0,4 – 5,5 mm
Valve Hex Size 1 1/4 in.
Valve Hex Size (metric) 31,8 mm
Valve Installation Torque 150 – 160 lbf ft
Valve Installation Torque (metric) 203 – 217 Nm
Model Weight 1.01 lb.
Model Weight (metric) 0.46 kg.
Seal kit – Cartridge Viton: 990016006

Configuration Options

Control

X Not Adjustable

Setting Range

A 4 psi (0,3 bar) Cracking Pressure, .016 – .218 in. (0,4 – 5,5 mm)
B 15 psi (1 bar) Cracking Pressure, .016 – .218 in. (0,4 – 5,5 mm)
C 30 psi (2 bar) Cracking Pressure, .016 – .218 in. (0,4 – 5,5 mm)
D 50 psi (3,5 bar) Cracking Pressure, .016 – .218 in. (0,4 – 5,5 mm)
E 75 psi (5 bar) Cracking Pressure, .016 – .218 in. (0,4 – 5,5 mm)
F 100 psi (7 bar) Cracking Pressure, .016 – .218 in. (0,4 – 5,5 mm)
Z 1 psi (0,07 bar) Cracking Pressure, .016 – .218 in. (0,4 – 5,5 mm)

Seal Material

N Buna-N
V Viton

Material/Coating

/AP Stainless Steel, Passivated
Cavity: T-16A
Nominal Capacity: 60 gpm ( 240 lpm)
Downloads
PDFSTP
Possible variants

CNGCXAN, CNGC-XAN, CNGCXAN/AP, CNGC-XAN/AP, CNGCXAV, CNGC-XAV, CNGCXAV/AP, CNGC-XAV/AP, CNGCXBN, CNGC-XBN, CNGCXBN/AP, CNGC-XBN/AP, CNGCXBV, CNGC-XBV, CNGCXBV/AP, CNGC-XBV/AP, CNGCXCN, CNGC-XCN, CNGCXCN/AP, CNGC-XCN/AP, CNGCXCV, CNGC-XCV, CNGCXCV/AP, CNGC-XCV/AP, CNGCXDN, CNGC-XDN, CNGCXDN/AP, CNGC-XDN/AP, CNGCXDV, CNGC-XDV, CNGCXDV/AP, CNGC-XDV/AP, CNGCXEN, CNGC-XEN, CNGCXEN/AP, CNGC-XEN/AP, CNGCXEV, CNGC-XEV, CNGCXEV/AP, CNGC-XEV/AP, CNGCXFN, CNGC-XFN, CNGCXFN/AP, CNGC-XFN/AP, CNGCXFV, CNGC-XFV, CNGCXFV/AP, CNGC-XFV/AP, CNGCXZN, CNGC-XZN, CNGCXZN/AP, CNGC-XZN/AP, CNGCXZV, CNGC-XZV, CNGCXZV/AP, CNGC-XZV/AP

Hydnet
EA Rosengrens gata 29
421 32 Västra Frölunda

+46 31 - 499 490
[email protected]

Products

Pages

Links

Partners