Hydnet - the specialist in intelligent hydraulic systems
Göteborg: +46 31 499 490
|
Stockholm: +46 8 59 470 470
|
E-mail: [email protected]
0
Quotation Request
Contact
CNAC

Priority flow control valve from Sun Hydraulics

Description

This valve is a fixed-orifice, non-pressure-compensated flow control with a reverse flow check. The flow setting is specified by the user and is set at the factory.

Read more ▼
  • Customer must specify the orifice diameter.
  • These are essentially check valves with bypass orifices. The flow path matches Sun’s flow controls and can be used in any flow control manifolds. Valves with the opposite direction of flow can be found under check valves with bypass orifices.
  • Because these valves are non-compensating devices, the fixed orifice size will regulate flow through the valve in proportion to the square root of the pressure differential across ports 1 and 2.
  • All 2-port flow control cartridges are physically and functionally interchangeable (i.e. same flow path, same cavity for a given frame size). However, cartridge extension dimensions from the mounting surface may vary.
  • The customer specified orifice diameter is stamped on one of the cartridge’s hex faces.
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

Technical Data

Note: Data may vary by configuration. See CONFIGURATION section.

Cavity T-162A
Series 0
Capacity 7.5 gpm
Capacity (metric) 30 L/min.
Maximum Operating Pressure 5000 psi
Maximum Operating Pressure (metric) 350 bar
Orifice Range .016 – .062 in.
Orifice Range (metric) 0,4 – 1,6 mm
Valve Hex Size 3/4 in.
Valve Hex Size (metric) 19,1 mm
Valve Installation Torque 20 – 25 lbf ft
Valve Installation Torque (metric) 27 – 33 Nm
Model Weight 0.17 lb.
Model Weight (metric) 0.08 kg.
Seal kit – Cartridge Viton: 990162006

Configuration Options

Control

X Not Adjustable

Setting Range

A 4 psi (0,3 bar) Cracking Pressure, .016 – .062 in. (0,4 – 1,6 mm)
C 30 psi (2 bar) Cracking Pressure, .016 – .062 in. (0,4 – 1,6 mm)
E 75 psi (5 bar) Cracking Pressure, .016 – .062 in. (0,4 – 1,6 mm)

Seal Material

N Buna-N
V Viton

Material/Coating

/AP Stainless Steel, Passivated
/LH Mild Steel, Zinc-Nickel
Cavity: T-162A
Nominal Capacity: 7.5 gpm (30 lpm)
Downloads
PDFSTP
Possible variants

CNACXAN, CNAC-XAN, CNACXAN/AP, CNAC-XAN/AP, CNACXAN/LH, CNAC-XAN/LH, CNACXAV, CNAC-XAV, CNACXAV/AP, CNAC-XAV/AP, CNACXAV/LH, CNAC-XAV/LH, CNACXCN, CNAC-XCN, CNACXCN/AP, CNAC-XCN/AP, CNACXCN/LH, CNAC-XCN/LH, CNACXCV, CNAC-XCV, CNACXCV/AP, CNAC-XCV/AP, CNACXCV/LH, CNAC-XCV/LH, CNACXEN, CNAC-XEN, CNACXEN/AP, CNAC-XEN/AP, CNACXEN/LH, CNAC-XEN/LH, CNACXEV, CNAC-XEV, CNACXEV/AP, CNAC-XEV/AP, CNACXEV/LH, CNAC-XEV/LH

Hydnet
EA Rosengrens gata 29
421 32 Västra Frölunda

+46 31 - 499 490
[email protected]

Products

Pages

Links

Partners