Hydnet - the specialist in intelligent hydraulic systems
Göteborg: +46 31 499 490
|
Stockholm: +46 8 59 470 470
|
E-mail: [email protected]
0
Quotation Request
Contact
LOKOZ

Throttle valve with position indication from Sun Hydraulics

Description

These unbalanced, pilot-to-close logic valves are 2-way switching elements that are spring biased open. Pressure at either work port 1 or 2 will tend to keep the valve open while pressure at port 3 will tend to close it. The force generated at port 3 must be greater than the sum of the forces acting at port 1 and port 2 plus the spring force for the valve to close. NOTE: The pilot area (port 3) is 1.8 times the area at port 1 and 2.25 times the area at port 2.

This valve incorporates a position switch to provide confirmation that the valve is spring biased to the fully open position.

Read more ▼
  • These valves will work in Sun’s standard T-19A cavity at lower capacity. To realize the full stated capacity, the T-19AU cavity should be used.
  • These valves have positive seals between port 2 and the pilot area.
  • This cartridge is supplied as a sealed, factory set unit and is not field serviceable. Any tampering will violate the product warranty.
  • When torquing this cartridge into its cavity, a crow’s foot wrench or similar will be required since the position switch precludes the use of a deep socket wrench.
  • Because these valves are unbalanced, operation is pressure dependent. Opening and closing of the poppet are functions of the force balances on three areas: Port 1 = 100%, Port 2 = 80%, and the Pilot Area = 180%.
  • These valves are pressure responsive at all ports, therefore it is essential to consider all aspects of system operation through a complete cycle. Pressure changes at any one port may cause a valve to switch from a closed to an open position, or vice versa. All possible pressure changes in the complete circuit must be considered to assure a safe, functional system design.
  • All ports will accept 5000 psi (350 bar).
  • Position switch is CE approved.
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

Technical Data

Note: Data may vary by configuration. See CONFIGURATION section.

Cavity T-19AU
Series 4
Capacity 300 gpm
Capacity (metric) 1100 L/min.
Maximum Operating Pressure 5000 psi
Maximum Operating Pressure (metric) 350 bar
Maximum Valve Leakage at 110 SUS (24 cSt) 1 drops/min.
Maximum Valve Leakage at 110 SUS (24 cSt) (metric) 0,07 cc/min.
Pilot Volume Displacement .47 in³
Pilot Volume Displacement (metric) 7,7 cc
Pilot Passage into Valve .09 in.
Pilot Passage into Valve (metric) 2,3 mm
Area Ratio, A3 to A1 1.8:1
Area Ratio, A3 to A2 2.25:1
Valve Hex Size 1 5/8 in.
Valve Hex Size (metric) 41,3 mm
Valve Installation Torque 350 – 375 lbf ft
Valve Installation Torque (metric) 474 – 508 Nm
Model Weight 3.55 lb.
Model Weight (metric) 1.61 kg.
Seal kit – Cartridge Viton: 990019006
Supply Voltage 20-30 VDC
Operating Temperature Range -25 to 80 °C
Vibration ≥ 50g, 0-500 impulses/sec
Shock >50 g, 1ms
Reverse Polarity Protection Yes
Maximum Output Load ≤ 400 mA, Duty Ratio 100%
Short Circuit Protection Yes, Load Short Unlimited
Turn On Time ≤ 25 ms
Hysteresis ≤ .002 in.
Thermal Shift – 0 to 80 °C ≤ ± .004 in.
Thermal Shift – 0 to 80 °C ≤ ± (metric) 0,1 mm
EMC DIN EN 61000-6-1/2/3/4
Connector M12 X 1 (4) Pin
Connector Environment Rating IP65

Configuration Options

Cracking Pressure

D 50 psi (3,5 bar)

Seal Material

N Buna-N
V Viton
Cavity: T-19AU
Nominal Capacity: 300 gpm (1 100 lpm)
Downloads
PDFSTP
Possible variants

LOKOZDN,LOKOZDV,LOKO-ZDN,LOKO-ZDV

Hydnet
EA Rosengrens gata 29
421 32 Västra Frölunda

+46 31 - 499 490
[email protected]

Products

Pages

Links

Partners