Hydnet - the specialist in intelligent hydraulic systems
Contact
DRBRX

3-way directional valve from Sun Hydraulics

Description

Direct-acting, 3-way directional cartridges (3 to 4 open, 2 blocked) are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.

Read more ▼
  • The flow path between port 2 and port 3 is bidirectional.
  • Because of their direct-acting design, these cartridges feature low internal leakage and low pilot flow consumption.
  • Pressure at port 4 is directly additive to the setting of the valve.
  • This valve is not bistable; it is capable of modulating between the two positions shown.
  • Maximum pressure at port 3 should be limited to 3000 psi (210 bar). This is due to fatigue strength limits not hydraulic operating limits.
  • Incorporates the Sun floating-style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

Technical Data

Note: Data may vary by configuration. See CONFIGURATION section.

Cavity T-21A
Series 1
Capacity 7 gpm
Capacity (metric) 28 L/min.
Maximum Operating Pressure 5000 psi
Maximum Operating Pressure (metric) 350 bar
Maximum Valve Leakage at 110 SUS (24 cSt) 2 in³/min.
Maximum Valve Leakage at 110 SUS (24 cSt) (metric) 30 cc/min.
Valve Hex Size 7/8 in.
Valve Hex Size (metric) 22,2 mm
Valve Installation Torque 30 – 35 lbf ft
Valve Installation Torque (metric) 41 – 47 Nm
Seal kit – Cartridge Viton: 990021006
Model Weight 0.33 lb.
Model Weight (metric) 0.15 kg.

Configuration Options

Shifting Pressure

F 100 psi (7 bar)

Seal Material

N Buna-N
V Viton
Cavity: T-21A
Nominal Capacity: 7 gmp (28 lpm)
Downloads
PDFSTP
Possible variants

DRBRXFN, DRBR-XFN, DRBRXFV, DRBR-XFV