Check valve from Sun Hydraulics
This valve is a spring biased closed, pilot-to-close check cartridge that has a 20:1 pilot ratio. The valve allows flow from port 1 to port 2 and blocks reverse flow. Pressure at the pilot (port 3) opposes pressure at port 1 at a ratio of 20:1.
Note: Data may vary by configuration. See CONFIGURATION section.
| Cavity | T-11A |
| Series | 1 |
| Capacity | .11 in. |
| Capacity (metric) | 2,8 mm |
| Maximum Operating Pressure | 5000 psi |
| Maximum Operating Pressure (metric) | 350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 drops/min. |
| Maximum Valve Leakage at 110 SUS (24 cSt) (metric) | 0,07 cc/min. |
| Valve Hex Size | 7/8 in. |
| Valve Hex Size (metric) | 22,2 mm |
| Valve Installation Torque | 30 – 35 lbf ft |
| Valve Installation Torque (metric) | 41 – 47 Nm |
| Seal kit – Cartridge | Viton: 990011006 |
Control
| X | Standard Pilot |
| L | Manual Override |
Cracking Pressure
| D | 50 psi (3,5 bar) |
| H | 200 psi (14 bar) |
Seal Material
| N | Buna-N |
| V | Viton |
| E | EPDM |
Material/Coating
| /AP | Stainless Steel, Passivated |