{"id":73307,"date":"2025-10-24T08:43:14","date_gmt":"2025-10-24T08:43:14","guid":{"rendered":"https:\/\/staging.hydnet.se\/erosion-due-to-cavitation-in-hydraulic-manifolds\/"},"modified":"2025-10-24T08:43:14","modified_gmt":"2025-10-24T08:43:14","slug":"erosion-due-to-cavitation-in-hydraulic-manifolds","status":"publish","type":"post","link":"https:\/\/hydnet.se\/en\/erosion-due-to-cavitation-in-hydraulic-manifolds\/","title":{"rendered":"Erosion due to cavitation in hydraulic manifolds"},"content":{"rendered":"

Cavitation<\/strong> refers to the formation of small bubbles in the hydraulic oil, typically caused by high flow velocities, pressure drops, and low system pressure. These bubbles consist of dissolved gases and vaporized oil.<\/p>\n

High Flow Velocity and Low Pressure<\/h2>\n

At high speeds and low pressures, combined with rapid pressure drops, bubbles can form in the oil. When these bubbles implode, they release enough energy to strip electrons from the oil molecules. This process can produce a faint blue glow \u2013 a phenomenon known as sonoluminescence \u2013 and is sometimes accompanied by a distinct white noise<\/em>.<\/p>\n

It’s not the bubbles themselves that cause erosion, but the implosion. If a bubble collapses near a surface, the resulting shockwave can damage the material on a molecular level, leading to erosion over time.<\/p>\n

However, if the downstream pressure is high enough and the bubble collapses further inside the valve, near where it was formed, no damage or erosion will occur.<\/p>\n

How to Prevent Erosion due to Cavitation<\/h2>\n

The document below provides a more detailed explanation of how to prevent cavitation, but here are the key recommendations:<\/p>\n